Description

Regulation principle

Utilizing the load-bearing capacity of scissor jacks, each support column is equipped with a scissor jack. The lead screw of the scissor jack is connected to the drive shaft via a universal joint. Rotating the lead screw raises or lowers the support beam. By manually or electrically cranking the jack lead screw, the angle of the photovoltaic modules installed on the support frame facing the sun can be adjusted synchronously through multiple support points.

● The weight of a jack-type adjustable support frame is approximately 35 tons per 1MW.

● The adjustable jack-type support rod will not rust for 25 years due to hot-dip galvanization.

● The battery for the adjustment tool can last a day.

● Adjustable jack stands are generally priced 0.03 yuan/watt higher than fixed jack stands.

● Jack-type adjustable support bracket is installed for approximately 1.5GW.

● No need to tighten or loosen bolts or pins; one person can adjust at least 5MW per day.

Product Advantages

● The adjustable support has the same foundation accuracy requirements as the fixed support, while the foundation accuracy requirements are lower.

● The jack has a large load-bearing capacity and a self-locking function, which can effectively prevent component plane swaying caused by wind vibration.

● The adjustable drive mechanism is a jack, which uses a hot-dip galvanized anti-corrosion process and requires no lubricating oil or machine oil. The support frame is maintenance-free for 25 years.

● Jack-type adjustable support, high adjustment efficiency, low cost, no need for tightening bolts or pins, one person can adjust at least 5MW per day.

● The adjustable stand can be continuously adjusted within a 55° range, and the adjustment angle can be set arbitrarily; there is no need to set a fixed position.

● The transmission rod features a universal joint design, eliminating the need for multiple support points to be concentric.

● Low installation cost and easy installation. The bracket and components are installed flat during installation and adjusted to the corresponding angle after installation.

● It adopts an intelligent electric adjustment device, which makes adjustment simple and efficient.

Technical parameters